Technical data sheet – EV..R3+BAC
EV..R3+BAC
Electr. 3-way PI-CCV Belimo Energy Valve™, AC/DC 24 V, BACnet/IP, BACnet MS/TP, Modbus TCP, Modbus RTU, MP-Bus, Cloud, 2…10 V
Valve specifications
Pattern
3 way (DN15-DN50)
V'nom [l/s]
1.67 – 4.17
Flow rate adjustable
25…100% V’nom
Fluid
Water, water with glycol up to max. 60% vol.
Fluid temperature
-10…120°C [14…248°F]
Fluid temperature note
-10…120°C [14…248°F]
At a fluid temperature of -10…2°C, a stem heater or a valve neck extension is recommended.
Áp suất đóng
1400 kPa
Close-off pressure
200 kPa for low-noise operation
Flow characteristic
Equal percentage
Leakage rate
Air-bubble tight, leakage rate A
Pipe connection
Internal and external thread
Actuator specifications
Voltage AC/DC
AC/DC 24 V
Power consumption (running)
5 W
Power consumption (holding)
3.9 W
Power Consumption For Wire Sizing
7.5 VA
Connection Supply Control
Cable 1 m, 6x 0.75 mm²
Connection Ethernet
RJ45 socket
Control type
- BACnet/IP
- BACnet MS/TP
- Modbus TCP
- Modbus RTU
- MP-Bus
- DC 2…10 V
- DC 0.5…10 V
- Hybrid (communicative / analogue)
- Cloud
Protection category
IP40
Download
Installation instructions – EV..R3+BAC
EU Declaration of Conformity – EV032R3+BAC
Notes for project planning – 3-way Belimo Energy Valve™
Notes for project planning – General notes
Environmental Declaration – EV..R3..
3-way mixing circuit with 2-way Energy Valve / EPIV
Application brochure – Air handling units
Application brochure – Heat Generation
Application guide – Belimo Energy Valve™
Brochure - Belimo characterised control valve - 8 advantages
Brochure – 8 reasons to use pressure-independent control valves
Brochure – Belimo Energy Valve™ and Thermal Energy Meter
Brochure – Bus solutions from Belimo
Brochure – Energy efficiency and comfort in buildings
Tool Connections
Web server manual - Belimo Energy Valve™ / Thermal Energy Meter
Request a Consultation
Please fill out the form below and we will contact you as soon as possible.