Technical data sheet – EP..R2+BAC
EP...R2+BAC
ePICV DN15-50, BACnet MS/TP, Modbus RTU, MP-Bus, 2…10 V
Valve specifications
Pattern
2-way (DN15-DN50)
V'nom [l/s]
1.67 – 4.17
Flow rate adjustable
25…100% V’nom
Fluid
Water, water with glycol up to max. 60% vol.
Flow temperature
-10…120°C [14…248°F]
Flow temperature note
At a fluid temperature of -10…2°C, a stem heater or a valve neck extension is recommended
Close-off pressure
1400 kPa
Differential pressure note
200 kPa for low-noise operation
Flow characteristic
Equal percentage
Leakage rate
Air-bubble tight, leakage rate A
Pipe connection
Internal and external thread
Thông số kỹ thuật bộ truyền động
Actuator specifications
AC/DC 24 V
Power consumption (running)
5 W
Power consumption (holding)
3.9 W
Power Consumption For Wire Sizing
7.5 VA
Connection Supply Control
Cáp 1 m, 6x 0.75 mm²
Control type
- BACnet/IP
- Modbus TCP
- Modbus RTU
- MP-Bus
- DC 2…10 V
- DC 0.5…10 V
- Hybrid (communicative / analogue)
Protection category
IP54
Request a Consultation
Please fill out the form below and we will contact you as soon as possible.